Last Saturday, Anita and I, were antiquing up in Northen Ohio around the Medina area. We stumbled into an antique store Seville, OH where Anita saw this old herb drying rack. The price was $89 but the lady said she would take $75 for it. Anita looked at it for a few minutes trying decide whether or not to buy it and if she did, where she would put it.
The rack looked old, but whether or not it was antique, who knows? It could have been made 20 years ago and just left outside to weather. While Anita debated on buying the rack, she asked me if I could make one. I told her it would super easy to do so she left it there and didn’t buy it.
The next day, I ripped 1/4″ strips off an old pine shelf we had in the garage. I decided the spacing should be 1 1/4″ so I cut blocks by using a sled on my table saw and laid out the spacing to see how it looked.
Anita came downstairs and told me she wanted rectangular spacing so she two two blocks and put them together. We both liked the new design, so I started pinning the strips together with 23 gauge pins. After we decided the overall dimensions the rack should be, I built a 1″ thick frame with the rest of the pine board. I used 18 gauge brads to attach the grid to the frame. The overall size was about 22″ wide x 47″ long.
In a few hours, the drying rack was built and hung up in our kitchen between the back door and the basement door. I posted a picture on Instagram and one of my followers said that the rack would work great for drying his weed. Maybe I should make more and sell them to a niche market. ??? Nevertheless, now Anita has a place to dry her herbs (whatever you do with dried herbs).