Tag: brown tool auction

Craftsman Made Plane

On By MVFlaim FurnituremakerIn Antique Tools6 Comments

Several weeks ago, I won this craftsman made hand plane on an auction site. When I first looked at it, I thought the body was made with three pieces of wood laminated together like a Krenov plane, but after studying it, I realized it was one single piece of wood. There are a couple of rivets through the body, but I don’t know what purpose they serve.

I’m not sure what the story of this plane is, but it looks like the craftsman owned a Sargent plane that broke, so he made a custom wood body out of mahagony and turned his plane into a transitional plane. You can see the chisel marks as he dug out for the frog, which adds a cool factor to the plane.

For whatever reason, he used four screws to hold down the frog to the body. It allows for very little advancement of the frog, but the plane still functions fine.

The owner also grounded the face of the lever cap down, which seems odd. You would think the original lever cap screw would have worked just fine, but maybe this screw is a replacement.

Luckily, I know the name of the craftsman of the plane (at least the last name). C Heiland is the person who made the plane. I googled “C Heiland Woodworker,” hoping I would find some information about him but had no luck. It would be awesome to have some provenance on the plane.

It’s a neat plane to look at, but I wanted to see how it performed, so I sharpened the blade and put it to work. The plane performs admirably. It was much better than the Buckeye plane I tried out from a few weeks ago.

Brown Tool Auction Winnings

On By MVFlaim FurnituremakerIn Antique Tools6 Comments

Every few months Clarence Blanchard from the Brown Tool Auction holds an antique tool auction in Pennsylvania. Even though some his auctions are within a day’s driving distance for me, I’ve never been to one. It’s just too easy for me to place a bid online and pay a $3.00 absentee bidder fee for every auction I win. Plus at $3.00, it’s a lot cheaper than spending the money on gas and a hotel room.

I never know what or if I win until about a week later when UPS drops of a box at my door. So you can imagine the excitement when I see a big box at my door. Typically the bigger the box, the more tools I have won.

As soon as I open it up I see molding planes neatly bubbled wrapped up. I love molding planes. To me they’re the router bits of hand tool woodworking. With a little bit of work, molding planes tune up nicely and create some of the nicest profiles that you can’t even produce with common router bits.

After unpacking the box, the results were in. Seventeen molding planes and two Stanley bench planes. All of the planes were in good shape and need only a little bit of tuning to bring them back to working condition.

Of the two Stanley planes I won, one was the Big Boss of Stanley planes, the No 8C Corrugated Jointer. This plane is in excellent condition and with a little bit of work, it will clean up to be a top shelf tool. The other bench plane was a nice Stanley 5 1/2C corrugated plane. Collectors go crazy for the corrugated soles as they tend to bring in higher prices, but for me, the corrugations just act as a place for dried glue to hang out. The theory behind corrugated soles was that they tend to be easier to push because of the less mass on the workpiece, and they were easier to fettle the bed because you didn’t have to remove as much metal. I haven’t found either one of those benefits to be true.

The molding planes were nice with a wide variety of profiles in the mix. Over the next few weeks I’ll tune them up and list them for sale on eBay.

As you can see, I have a soft spot for molding planes. The day I figured out how to tune one up and make it sing, I was hooked. I intend to sell some of my duplicate profiles on eBay in the coming weeks.