Repairing an Accent Table

My wife bought an accent table at a local thrift store yesterday. She hesitated on buying it because it needed some work but I assured her that I could fix it quickly.

When we got it home, I examined how to repair the stretcher and make the legs not so wobbly. It seems that someone else tried to repair the stretcher in the past with no luck.

After popping off the glue blocks, I noticed that the only joinery on the legs was a dowel rod and some glue. It’s no wonder why they wobbled. I’m not sure how old the table is but it’s made from mahogany and the fasteners are straight slotted screws. My guess would be around the 1940’s but that’s just a guess.

If I was to restore this table properly, I’d used mahogany for the stretcher and make it similar to the original but I’m by no means a professional furniture restorer. If anything, I’m closer to the craftsmen you see on Flea Market Flip where people buy a $40 wheel barrow at an antique show, turn it into a coffee table and sell it at a New York City art show for $450. Except, I don’t do that dramatic transformation on pieces and don’t get anywhere close to those prices. (Personally, I think that show is fake). My wife will eventually paint the table so I just grabbed some scrap wood.

I grabbed some red oak and planed it down to 3/8″ then drew some arches on it with my french curve. Then it was onto my band saw and spindle sander to cut and sand the stretcher to shape. I just whipped this shape up in my head without much thought. I think it’ll do fine.

To break the edges of the stretcher and give it curves, I used my specialty scraper with various radius’s cut out and scraped the edges to shape using the 1/2″ radius.

Cutting the piece to proper length took a little trial and error, but I eventually got it to seat in the mortises with the legs being perpendicular to the top when the table was flipped over.

Then I grabbed some scrap pieces and glued and pinned hefty glue blocks onto the legs to hold them to the top better.

Here’s the table all glued up waiting for paint. My wife will paint the table either white, or black, or green, or duck egg, or whatever. I’ll have to wait and see which one she picks. I’ll throw a picture up when she’s done. Merry Christmas!

UPDATE 1-20-20; Anita painted it white with a stencil on top.