Grizzly No 7C Jointer Plane

Last weekend on the Worlds Longest Yard Sale I picked up this Grizzly jointer plane for a fair price. When I first saw it, I thought it was a Woodriver plane but then I saw the knurled screw on the lever cap and thought that maybe it was a Bench Dog plane or even an Avant. After I asked my followers on Instagram what brand it was, I was told it’s sold through Grizzly.

I took the plane apart to get a look at the all the parts. The biggest thing I saw was the design of the frog. This little tab to adjust the the frog seems rather weak as it could easily break off after years of use. I didn’t realize the flange and screw design of Bailey planes was so expensive to make that they would have to change the design of the frog to eliminate it. LOL Why they opted for this tab and stupid looking screw is beyond me.

There’s no makers name on the blade so its clear that this plane is probably made by a Chinese company like Quangsheng as they make planes for a bunch of different companies.

Another thing I noticed is the back of the lever cap looks unfinished. It reminds me of the homeowner Fulton or Shelton brand planes sold at Sears back in the day.

You can tell that the manufacturing tolerances are not very tight as the two frog hold down screws have different size slots milled at the top. It was a pain in the ass to remove the screw with the wider slot as my screwdriver kept slipping. You can see how easily it marred the top as the steel they used is not very strong.

The biggest issue I saw was the length of the lever cap overhung the chip breaker when it was fully seated down on the plane. This would cause the plane to jam with shavings as they would get caught underneath the lever cap. I had to raise the lever cap up a little bit for shavings to pass through.

The plane’s blade was ground at 25 degrees but still needed to be honed. Amazingly, the plane cut rather well after I hit the blade with my waterstones. The sole of the bed felt smooth and I was able to get a nice shaving with a little bit of tuning. How well it will cut like this I have no idea as I don’t know the quality of the blade’s steel but I assume it’s not the best.

The shaving was .01 thick which is fine for a jointer. It’s a shame the plane has some design and manufacturing quality issues. It could be a real nice plane for decent money as it’s only $94 on Amazon.