Harold White Lumber Company

Earlier this year my territory changed for my job and I acquired the Lowe’s in Morehead, KY as one of my accounts. Whenever I would drive down to that Lowe’s, I would always drive by the Harold White Lumber Co. I was always impressed by the amount of logs the mill had on its lot, but I saw no showroom or retail office, so I always kept driving. That was until a few weeks ago, when I decided to pull in and see what the place was all about. I figured the worse thing that could happen is they would tell me they only sell to wholesale accounts and kick me out.

20170822_130137

I stopped at the mill work office and asked if they sold to retail customers. They said they did, but I would have to drive over to the lumber office so, I got back into my car and headed down the driveway to another office. There I met the office manager who asked what type of wood I was looking for. I said “nothing at the moment, just wondered if you sell to retail customers”. She gave me their price list and asked the plant manager to show me around the mill. He took me where they keep the short stacks of lumber with loads of cherry, oak, wormy maple and poplar. He told me that the 4/4 poplar was only $.80 board foot. I usually pay $2.20 for 4/4 poplar at my current lumber yard in Cincinnati. I would have bought some that day, but I didn’t bring any cash with me plus, I was just looking for info at the time and had no intention of buying anything anyway.

20170822_130154

The mill is huge with thousands of logs on their land. I looked at their price list and they carry all the major domestic species, but they also have basswood, sycamore, sassafras, hemlock, and coffee tree. I was told by the office manager that they don’t always have the rare species in stock, but if you call ahead, they may be able to mill some up. You can even buy a whole log if you want to mill the wood yourself.

20170822_130149

So today, I went back and I told the same office manager I was interested in the four-foot shorts. She had an employee follow me back to the area they keep them so they could load it in my car. The last time I was here, this whole area was stacked with bundles of lumber. The guy told me that the shorts don’t last long. They even have a big dumpster where people can dumpster dive for one to two foot long boards.

20170822_124739

I came home with 20 board feet of 4/4 FAS White Oak for $30.00 for a whiskey barrel coffee table my cousin wants me to make for her. The wood should be enough to make the base and top of the table as I already bought a halved whiskey barrel last weekend. The next time I go back, I’m going to stock up on poplar, maple, cherry, and walnut. It’s nice to have place where I can buy hardwood lumber dirt cheap.

20170822_130101

New Lumber Rack

A couple of weeks ago I picked up a Port a Mate lumber rack on clearance for $20.00 at a local Lowe’s. Even though at the time, redoing my lumber area wasn’t top on my list, the price of the rack (originally $70) was too good to pass up.

SAMSUNG CAMERA PICTURES

My lumber area was basically trashed and had been for several years. I’d clean it up every once in awhile, but it always ended up being a catch all for junk I had lying around. The shelves I used for storing lumber was made from 2×4’s I built from a plan I saw in Shop Notes years ago. They did the job for the most part, but it still wasn’t very organized for storing my lumber. My wife, Anita, was glad I bought the lumber rack because she was sick of looking at the mess.

SAMSUNG CAMERA PICTURES

After Anita helped me clean up the area, I bought some Dry Lock mold inhibitor paint and we painted both the back and side walls. Then we painted white latex paint on top of it. I moved the cabinet that stored my finishes over closer to my work bench and moved the shelving rack from the back wall to the side. This gave me room to store a full sheet of plywood if I ever needed. I didn’t want the lumber rack to hang off my block wall because I was afraid the added weight may damage the foundation so, I notched out 2×4’s at the top and screwed them to the floor joists. I let the 2×4’s “hang” from the floor joist, then screwed one screw at the bottom of the grey block using plastic wall anchors. I then simply screwed the lumber rack onto the 2×4’s.

As you can see, I use the just-in-time inventory system when it comes to buying lumber. I really don’t have that much lumber to begin with as I buy what I need every time I build something. Any remaining wood is scrap that I can never throw away. The biggest piece of lumber I have is a slab of 2″ thick cherry I bought a couple of years ago during the Longest Yard Sale. I’ve had plans to build something with it, just haven’t yet. Maybe now I will since I can finally get to the board.

 

Making a Bench from Dimensional Store Bought Lumber

When my wife Anita does shows, I’m always looking for something that I can make fairly quickly that she can sell in her booth to help pay for some of her fees. After helping her do shows over the past couple of years, I’ve noticed that small benches are quite popular. They’re nice to stick out on front porches or foyers or even mud rooms. In fact, some people even use a bench as the seating for one side of their kitchen table.

10407335874_d0e82a20d0_z

I designed this bench to be made from a 2″ x 12″ and a 2″ x 8″ that are eight feet long. However, if you change the dimension of the stretcher a little bit, it could be made form a 2″ x 12″ x 10′. The only issue doing that is you need to make sure your 2″ x 12″ x 10′ is choice wood with no splits at the end of the board because you’ll need nearly every inch of it. It doesn’t matter to me because I can’t fit a ten foot board in my car anyway, so I bought a 2″ x 12″ x 8′ and 2″ x 8″ x 8′ for under $20.00.

ww001

The construction of the bench is super simple. I make the legs 9″ wide x 16″ long. I measure down 2 1/2″ from top and bottom on each side and use the lid from my garbage can to draw an arch connecting the two marks. Then I cut it off the arches on my band saw. I sanded the arches smooth on my oscillating spindle sander.

ww012

The feet are 5″ wide x 10 3/4″ long. I draw a 1″ radius on both sides and remove the material with chisels, planes and files.

I want the bench to have four feet so I take two of the pads and cut grooves in them on my table saw. Once all the grooves are cut, I remove the waste with my bench router and plane everything smooth.

When designing the stretcher, I did nearly the same thing as the legs. I measured 2 1/2″ from each side and make a mark. Then I find the stretcher center and mark 2 1/2″ off each side of the center. I swing a compass set at a 12″ radius connecting the marks creating the arches for the stretcher.

ww015

In order for the legs to attach tot the stretcher, I bored a 1″ x 4″ mortise through the legs with a 1″ forstner bit and cleaned it up with chisels. The tenons I cut on the table saw and band saw and cleaned them up with my rabbet plane.

After all the parts are sanded, I dry fitted everything together to make sure the bench looked right. I wanted the tenons to have a mechanical fastener along with the glue, so I drilled two 1/4″ holes through the side of the legs going through the tenons.

20140823_123357

I grabbed some scrap oak and split a few splitters of wood with a chisel. The pins run down the grain making them exceptionally stronger since the grain follows the strength of the wood. I sized the pins by punching them through my Lie-Nielsen dowel plate. I shaved the pins a little bit with my spoke shave so they would start to fit through the 1/4″ hole of the dowel plate. Once the pin starts to fit in the hole, I pound the hell out of it.

20140823_123402

After I was satisfied with the way the bench stretcher fitted to the legs, I started gluing and screwing everything together, I placed glue of the pins and inserted them into the tenons of the bench. I didn’t bother draw boring the holes of the tenon. I was already satisfied with the tightness of the joint.

20140825_171145

The bench was painted a duck egg blue and waxed over top. The next bench I make will probably be a different color. Maybe a black or grey as neutrals are always popular.

20140825_170758

You can see the detail of the top where the scrub plane left little ridges in the wood giving the bench a bit of detail. It definitely looks better than having a plain board for the seat of the bench.