Repairing a Stool

Back in the summer, my wife bought a stool for $5.00 at an antique show. I honestly forget which show it was as we go to one every weekend. The stool was in decent shape, it just had a broken rung which is why it was only $5.00. She asked if it could be fixed and I told her I could fix it pretty easily.

The first thing I did was clean out the hole the rung sat in with small drill bits and awls. I then cleaned up a bit of the glue residue with a small wire brush.

I needed a rung that was 3/4″ in diameter so I grabbed my shaving horse and went to work. I hardly use this thing so anytime I get a chance, I jump on it. Shaving horses are a blast to use.

I used my drawknife and spoke shave to get close to the final diameter, then I used a scrap piece of wood with a 3/4″ hole to check final dimension. I could have just bought a 3/4″ dowel, but where’s the fun in that?

I removed the rung from the other side of the chair to determine the length my piece needed to be. I then glued and installed the rungs back into the chair while using strap clamps to hold everything tight while the glue dried.

The seat needed to be reglued a bit as well so some glue and clamps did the trick. When everything was dry, the stool was sturdy as a rock.

I thought Anita might have painted the stool, but she decided to keep it natural. She didn’t even stain the new rung dark to match the other rungs. The stool looks nice as a plant stand and for $5.00, I’m not complaining.