Springfield Extravaganza

On May 23, 2022May 23, 2022 By MVFlaim FurnituremakerIn Antique ToolsLeave a comment

Last weekend was the Springfield Extravaganza. It’s one of my favorite antique shows that happens in May and September in Springfield, Ohio. The fairgrounds is full with over 2000 dealers selling all sorts of antiques and the occasional junk. I look forward to it as much as the World’s Longest Yard Sale up and down US127 in August.

Luckily, I found some planes this time at the show. Many times in the past, I would only be able to pick up a Stanley plane or two, but this year, the Antique Tool Gods were with me as I ended picking up almost ten Stanley planes. None are exceptionally rare but all will make nice users. In fact, the rarest plane I bought was a Union X6 vertical post plane.

Ironically, the only tools I bought this weekend were planes. I was looking for drills, chisels and saws but there weren’t too many available. The one saw I had an interest in was a Disston Thumbhole D8 rip saw that was in a barrel with 50 other saws. When I asked the guy what he wanted for it, he replied “$50 per saw, unless you want all of them, then they’re $7.00 each.” I quickly put the saw back and walked away.

I’ll spend the next few weeks cleaning my planes up, but I’m not too sure how long that’ll take me as I just started my new job today (I got promoted) as I may end up working more hours with this new gig than I did before. However, I’m optimistic I’ll get back in the shop soon.

You can follow me on Instagram to see how the planes end up looking. I’ll remove the rust and sharpen the blades so that they can be put back to work. In fact, I just posted a couple of pictures of a Stanley No 71 Router Plane I restored after finding it at a yard sale earlier this month.

Fixin’ Up a Buffet

On October 7, 2018October 7, 2018 By MVFlaim FurnituremakerIn Furniture6 Comments

If you follow my blog, then you know that my wife and I have a couple of booths in antique malls where we buy and sell antiques. Occasionally we’ll buy old furniture and fix it up. This is a buffet we found at a yard sale for dirt cheap. It had some issues, but the price was too good to pass up, plus I knew I could make it usable again.

The first issue I had to take care of was the stretcher on the bottom looked like a dog gnawed on it.

The easiest thing to do was simply cut it off. Since Anita was going to paint the piece, I wasn’t too concerned about the dowel cut offs showing. Removing the stretcher didn’t cause the buffet to lose any stability.

The biggest issue the buffet had was the runner on the large drawer on top was completely broken off. There was no way to properly repair it so I decide to make a new one out of some scrap wood.

I milled a new piece to size and then used my Stanley No 45 plane to plow a 1/4″ groove down the middle on both edges.

I then cut a wide groove down the face of the piece with my table saw and cleaned it up with my router plane.

With a tenon cut on the end of the piece and a rabbet cut on the other end, the new piece worked perfectly in the old drawer. I tacked down the runner to the back of the drawer with a couple of small nails.

After the drawer was fixed, I shaved down the edges of the doors with a block plane so that they would close better. Once the buffet was functional again, Anita painted the piece with milk paint.

You can see how the milk paint gives the buffet old world character. This piece should sell quick in the booth.

The World’s Longest Yard Sale 2018

On August 7, 2018August 7, 2018 By MVFlaim FurnituremakerIn Antique Tools7 Comments

This weekend, my wife and I went back on the World’s Longest Yard Sale. If you’re not familiar with the sale, it runs the first weekend in August on US 127 from Michigan down to Alabama. In years’ past, we would head down to Chattanooga, TN to stay the night, then work our way home staying another night in Lexington, KY, but this year we decided just to make day trips and head back home at night.

This banner hangs in Mainstrassa Village in Covington, KY just a few blocks from the Lost Art Press. Many years ago, the yard sale started here, but in recent years Ohio and Michigan started to participate.

Heading down US 127, there will be areas set up every few miles down the road with vendors. Since we’ve done this sale for years, we know where the good stops are, but some of the smaller areas may have some of the best deals as those are true yard-salers selling their crap and not professional antique dealers selling their prize possessions for top dollar.

You’ll get a bit of everything at this sale. From antiques, to used tires, to baby toys, to a whole bunch of used clothes. It is after all a yard sale, so take your normal Saturday afternoon yard sale and times it by 690 miles.

Since we stayed away from the antique dealer mega stops, I didn’t see many antique tools from collectors. I did spot this old scroll saw in central Kentucky with a $350 price tag on it. Probably not a bad buy, but I wasn’t in the market for one, so I passed on it.

The most unusual piece I saw was this picture frame miter saw box just north of Cincinnati. There was no manufacturer’s name on it but it looked professionally made. I assumed it sat on top of a three-legged stand because of the length of back, but that is just a guess.

It came with a Disston saw, but there was no way for me to date it. If I had to guess, I’d say it was late 1800’s early 1900’s from the look of the screws.

The weather was nice, hot but nice. Every year it usually rains as we have to walk and drive around in the mud which is no fun. Everyday this weekend it was in the 90’s and humid as hell. We started at 8:00am and by 6:00pm we were suffering from the three B’s. Beat, Burnt, and Broke.

At the end of the weekend, this is what I came home with. A few Stanley planes, a veenering plane, Langdon miter box with a Disston saw, a set of Stanley No 105 forstner style bits, Millers Falls eggbeater drill, and a 2 1/2″ wide Ohio Tool Co chisel/slick. Not too bad considering what I paid for everything. There are a few hard to find tools in the group.

The prize of the bunch is the Stanley 5 1/4 C corrugated plane which is one of the rarest planes Stanley ever made. I found it in booth in Ohio from a young couple who were just selling random stuff. It was the only tool they had in their booth so I have no idea where they got it. They told me they looked up its value on the internet, but they were just trying to get rid of it, so I gladly took it off their hands.

I already spent the last couple of days cleaning it up. I already own a Stanley No 5 1/4 so I doubt I’ll use it. It’ll more likely be one of my top shelf tools.

The World’s Longest Yard Sale

On August 5, 2015August 7, 2015 By MVFlaim FurnituremakerIn Antique Tools, Workshop2 Comments

I’m on the World’s Longest Yard Sale and just picked up this Stanley miter box for $2.00. Deals to be had if you have the opportunity to do the yard sale this weekend down US 127.

The World’s Longest Yard Sale 2014

On August 10, 2014August 10, 2014 By MVFlaim FurnituremakerIn Antique ToolsLeave a comment

My wife and I got back from The World’s Longest Yard Sale today which runs down US 127 from Michigan to Alabama. We left Wednesday morning before it officially began and drove down US 127 looking for bargains stopping at dealers who sat up early. We ended up in Chattanooga, TN for a couple of nights.

photo YARDSALE.jpg

When we woke up in Chattanooga, we headed south toward Alabama because last year we had heard that that’s where all the good deals are. Going below Tennessee on the yard sale can be tricky because US 127 ends in Chattanooga. The yard sale continues on the Lookout Mountain Parkway which takes all different routes as it changes onto different state roads.

Once we got into Alabama we didn’t necessarily see a lot of good deals, just a bunch of dealers selling antiques. I did spot tons of anvils for sale. I could have bought 20 anvils if I was in the market for one, but I still have an anvil I bought two years ago sitting in the garage waiting for me to make a stand for it.

After we got back to the hotel we stayed for another night then headed up Tennessee in the morning. Tennessee had a bunch of professional dealers as well. My wife and I were buying a few things here and there, but the prices people wanted weren’t “yard sale” prices.

Everything was going fine until somewhere in the boon docks of Tennessee I got stung by a damn bee. What made the situation worse is that I just got stung in my lip by a bee a couple of weeks ago when I was doing mulch in my yard which made my lip swell up three times its normal size. Now another son of a bitch comes right toward my face and stings my eyelid. I’ve never been an anti-bee person, but I think I’m going to start pissing on my wife’s flowers so the little bastards can inject my urine into their bodies.

We drove to the nearest pharmacy 20 miles away and picked up some Benadryl and ice to prevent the sting from swelling up. I put ice on it all day, but sure enough when I woke up in Lexington, KY the next morning, my eye was swelled shut. We considered calling the trip and just head home, but I told Anita that I was fine and it’s best for us to just keep moving along.

Photo: I got stung again!!!!! Twice in three weeks. This is bullshit!

Kentucky had the most tools. However, a lot of dealers were around selling their tools at retail. There’s nothing wrong with selling retail, I’m just a picker so it needs to be a good deal for me to buy it. I found the best places to buy tools were the little road side sales with only a couple of yard sales. Not these big tent cities where there are 150-200 vendors in one spot.

photo 20140809_105618.jpg

photo 20140809_105940.jpg

photo 20140809_105655.jpg

We got back home last night and headed out this morning to check out Ohio. Ohio had the best deals on items. They were true yard sales with “yard sale” prices with very few dealers. When we were all done this afternoon I got a few tools. Nothing major considering we did it for nearly five straight days.

photo 20140810_170416.jpg

Out of all the tools I bought, the neatest was a panel raising plane I bought in Tennessee. It appears to be of German descent so it’s quite possible that a German immigrant made the plane when he came to America. There is no makers name on it so it’s definitely an owner made plane.

photo 20140810_170435.jpg

The guy who sold it to me told me that it was from the 1700’s, but I highly doubt that. I would guess anywhere in 1800’s. One of the clues that could determine its age is the bore hole made by whatever drilled it. If I can figure out what kind of drill bit that bore that hole, I could estimate the plane’s overall age.

photo 20140810_170455.jpg

Another nice find was this Disston stair case saw. I believe these little guys are somewhat rare so I was happy to pick him up at an extreme bargain.

photo 245e42f1-dcc7-4fab-82c1-27d5a18f2064.jpg

The yard sale is a lot of fun and you should definitely do it if it’s ever been on your bucket list. I’m not sure if we’ll go all the way down to Alabama next year, but we are already planning our next trip.

World’s Longest Yard Sale: US127 Corridor

On August 4, 2013August 4, 2013 By MVFlaim FurnituremakerIn Antique Tools19 Comments

My wife and I just returned from a five-day excursion on the The World’s Longest Yard Sale down US 127. The yard sale runs every year during the first weekend of August from Michigan down to Alabama. Last Wednesday, my wife Anita rented a Ford F-250 cargo van and we headed down to Chattanooga TN to spend the night. We picked up 127 around the Kentucky Tennessee border stopping at multiple yard sales running all the way to our hotel in Chattanooga. The next day we started heading up 127 back home.

Anita was looking for old furniture to fix up as well as things she could sell in her booth. I was looking for antique tools. We traveled over 1200 miles in five days traveling from Chattanooga, TN to Castine, OH and had an absolute blast. Nothing more fun than the thrill of the hunt. We ran into a little trouble at the top of Tennessee though. It was around 7:00 pm and we didn’t have a hotel booked. We drove all the way to Danville, KY hoping that a hotel on US 127 would have a room but they were all booked. We ended up driving all the way to Lexington, KY to find a room. The next day we got up and had a nice breakfast in neat little restaurant and headed back to Danville, KY to continue up US 127.

I picked up mostly a bunch of planes, some of them needing major cleaning, with a few miter boxes near the end of the trip. What’s amazing about my finds is that most of the planes I had bought had corrugated bottoms. I wasn’t specifically looking for corrugated planes but when I turned over a plane I was interested in, its bottom was corrugated. Twelve of the fifteen planes were that way. Amazing since corrugated planes are not as common as flat bottom planes in the market.

This is the shot of the bottoms of the planes with nearly all of them being corrugated. It’ll take a while but every one of these planes will be cleaned up and ready to be put back to use.

Near Danville, KY I ran into a guy selling a trailer full of cherry hardwood. I couldn’t buy the whole trailer but I did manage to pick up one of his slabs. This piece is 2″ x 16″ x 100″ and the offer was too good for me to pass up. Does anybody want to guess what I paid for this slab of cherry? Post a comment and I’ll let you know.