Well it’s been a tough few days with my dog Rylee passing away but I finally pulled myself together and put the finish on the bed.
After sanding the parts to 220 grit sandpaper, I applied a Brown Walnut analine dye to the bed. I diluted the dye to a 4:1 distilled water:dye solution and applied a liberal amount to the bed with a sponge wiping off the excess. I’ve been told to use distilled water instead of tap water because the minerals in tap water may change the color of the dye.
The dye turns all the wood to a uniform color creating a base for the gel stain that will cover it. After I washed the bed with the dye, it looked like I grabbed a handful of mud and smeared it all over the place but I realized it’s just the first step in the process.
After the dye dried, I needed to coat the bed with de-waxed shellac so that the gel stain won’t penetrate the wood too much making the wood appear blotchy. I create my own 2 lb cut shellac by diluting 4 ounces of shellac flakes to 16 ounces of denatured alcohol. I keep the shellac in an empty glass maple syrup container.
Once the shellac is applied, the bed turned darker but was still nowhere the color I wanted it be. My wife came downstairs to look at the progress I was making and told me she hated the way it looked. I told her not to worry as I was only half way done.
Allowing the shellac to dry overnight, I was ready to apply my first coat of stain. I used one coat of General Finishes Nutmeg Gel Stain applying it with a piece of an old t-shirt and wiping off the excess with another piece of old t-shirt. I used a dry paint brush and brushed away any swirl marks left by the t-shirts. Fortunately the bed started to take on a brownish color removing the mud look after I applied the stain .
For the next color I used Minwax Rosewood Gel Stain but before I applied it, I coated the bed with another coat of shellac so that the new color won’t affect the nutmeg color giving the finish more depth.
Now the bed has the reddish hue color I’m looking for. All that is left to do is apply the top coat with Arm-R Seal polyurethane oil combo. Three coats of the Arm-R-Seal coat and a lightl sanding of 600 grit sandpaper and parrafin oil, the bed was ready to be put back together.
The bed is finally done and I was pleased with the outcome. It took me longer than the month I promised my wife but she was fine with the delay. I forget how much the bed actually cost me to build since I threw away the receipts, but if I believe it was around $300-$400. A far cry from the $1699 Pottery Barn wanted for their bed. Now to take it apart again and drag it upstairs.
2 thoughts on “Making a Bed Part 3”
Wow, Mike! Great job on the finish. I appreciate how you took photos throughout the colouring process before and after each coat of dye or glaze.