One of the nice things about my job is the autonomy I get when I travel through my sales territory calling on Lowe’s and Home Depot’s in Cincinnati, Dayton and Indianapolis. Often during lunch, I’ll stop by a nearby antique mall and look for old tools. Yesterday I was in an antique mall near Dayton when I stumbled upon this beast. I’ve been buying antique tools for over twenty-five years and have never seen a miter box like this at any tool auction, tool collectors convention or even eBay.

It’s a huge Langdon Mitre Box with a Disston Miter Saw. On the front it has the patent date of Nov 15th 1864 and was made in Millers Falls, Mass. The front and the wood are painted green, but have no idea whether or not if it’s original paint.

The saw’s blade is an incredible 7 1/2″ deep and still straight. The etching is barely visible and may be able to pop out with a little bit of restoration. This behemoth must be something they used to install the crown molding at The Biltmore Estate.

The previous owner flipped the board upside down for some reason. I guess they felt it was nearly all used up so they wanted a fresh surface to cut on. I’m just glad they didn’t throw it away as it looks to be the original board.

It’s a Disston Saw with an apple handle, but is marked Langdon Mitre Box on the spine. The main saw nut is dirty, but it’s stamped Disston and Sons. I think Langdon Mitre Boxes eventually became part of the Millers Falls Tool Company, but I’m not entirely sure.

The saw has split nuts on the back which gives a clue as to how old it is. The problem is that I don’t know enough about saws to be able to date it, other than the 1864 patent date on the box. However, that doesn’t necessarily mean it was built during that time.

Since I’m not too familiar with miter boxes, I was hoping you might be able to help me out.

1) Does anyone know anything more about this miter box? How rare is it?

2) How old is it considering it has split saw nuts?

3) Is the green paint original to the miter box?

Any information would be greatly appreciated!

UPDATE 6/22/14: It was recommended by Trevor that I contact “The Langdon Mitre Box Guy” John Leyden and see if he could give me any more information on the miter box. After I sent John an email, he was nice enough to respond and send me this link. http://oldtoolheaven.com/miter-boxes/northampton-langdon.html. The miter box and saw appear to be the same one I own.